Over the years I have done a number of talks for local chapters of the Project Management Institute. They have covered a range of topics, but one common theme that comes up over and over is that Scrum is not the best Agile method for delivering an IT Project. I even published a short video on the topic:
Several years ago, I also published a short article describing what Scrum is good for; here it is.
So… if Scrum isn’t so good for IT project work, then what can bring real agility to IT projects?
IT Project Attributes
Most of my work experience prior to running my business was in IT projects in banking, capital markets, insurance and a bit in government and healthcare. I mention that merely to indicate that my discussion of this isn’t just theoretical: I’ve seen good projects and bad projects. I’ve been on death-march projects, small projects and massive projects ($1b+). I’ve dealt with regulatory issues, vendor issues, offshoring issues, telecommuting issues, architectural issues, political issues, and seen enough problems to understand the complexity of reality.
IT projects have some common characteristics:
- Like any project, there’s a deadline and a scope of work and a budget. These things don’t work well with Scrum. It’s possible to force them to fit together, but you lose a lot of what makes Scrum effective.
- IT (as opposed to, say, tech startups) tends to use more mature technology platforms. Scrum is neutral about technology, but there are other Agile methods that address this type of technology more effectively.
- IT Projects are often not the only thing going on in the technology organization. In particular, operations and user support add to IT project complexity, and require different “classes of service” than Scrum provides.
- The issues that I mentioned above such as regulation, vendors, offshoring etc. are also common attributes of IT projects. Scrum makes harsh demands on an organization that challenge the approach to dealing with these issues. The change required to accommodate Scrum may not be worth it.
The Bad News about IT Project Agility
The whole project orientation to IT work is questionable. It’s just not a good fit. In most mid- to large-size organizations, IT does two things: it provides technology services to the rest of the organization, and it provides technical product development capacity to lines of business. For example, upgrading the office wi-fi routers and adding a new payment type to the online customer portal, respectively. The work of the IT department, therefore, falls into several different categories:
- New artifacts that need to be created. Usually this is the stuff like coding algorithms and other business logic, creating new databases, configuring purchased systems, etc.
- Repetitive activities that need to be sustained for a period or indefinitely, or which occur on-demand but at irregular times. For example, running a nightly batch process or deploying an update to a production environment.
- Quality problems that need to be fixed. Defects and production problems are the obvious categories here, but also quality problems that are causing user confusion or time wastage.
- Obstacles to work that need to be overcome. Often obstacles come from outside the project team in the form of interruptions. Other forms of obstacles can be unexpected bureaucracy, shifting funding, problems with a vendor, etc.
- Calendar events that need to be accommodated. Milestones in the project, particularly regulatory milestones are crucial in IT project work, there are many other types such as all-hands meetings, statutory holidays, hiring or contract end dates, etc.
Of these, only repetitive activities and calendar events fit well into a project perspective. The others typically have a level of uncertainty… complexity… that makes it very difficult to approach with the project perspective of fixed deadlines and scope.
On the other hand, Scrum only really handles new artifacts and obstacles directly, and quality problems indirectly. These are the kinds of activities that are the focus of product development. Repetitive activities and calendar events are anathema to the core Scrum framework. If I think about this from a scoring perspective, Scrum supports these kinds of work as follows (-5 means totally counter, 0 means no impact, +5 means total support):
Scrum Support for IT Project Work Types:
- New artifacts: +5
- Repetitive activities: -2
- Quality problems: 0
- Obstacles: +4
- Calendar events: -5
SCORE: +2 – barely positive impact on IT project work!!!
The bad news, therefore: neither a project orientation nor Scrum really cover all the needs of an IT project environment.
Alternatives to Scrum
There are many, but these are my three favourite alternatives: Extreme Programming, Kanban and OpenAgile. All three of them cover the five types of work more effectively than Scrum. All three of them are oriented to more generic types of work. After describing each briefly, I’ll also mention which one is my top choice for IT project work.
Extreme Programming for IT Project Work
Historically, Extreme Programming (XP) emerged in an IT Project context: the famous C3 project at Chrysler. This approach to IT project work has many things in common with other approaches to agility (which are described in the Agile Manifesto). XP allows the five types of work as follows:
New artifacts are the core of XP and are usually expressed as User Stories. This is common to Scrum and many other Agile methods. These are typically the features and functionality of a system… the scope of the project work. XP does not make any strong assertions about the size or stability of the backlog of new artifacts and as such can accommodate the project orientation in IT with relatively fixed scope.
Repetitive activities are not explicitly addressed in XP, but nor is there anything in XP which would cause problems if an XP team is required to do operational or support work which is the source of most repetitive activities in an IT environment.
Quality problems are addressed directly with both preventative and reactive measures. Specifically, Test-Driven Development, Acceptance Test-Driven Development are preventative, and Refactoring and Continuous Integration are reactive. XP has a deep focus on quality.
Obstacles are not directly addressed in XP, but indirectly through the XP value of courage. Implicitly, then, obstacles would be overcome (or attempted) with courage.
Calendar events are not addressed directly for the most part with the exception of release planning for a release date. However, the stuff related to other calendar activities is not directly handled. XP is less antagonistic to such things than Scrum, but only by implication: Scrum would often put calendar events in the category of obstacles to be removed to help a team focus.
XP Support for IT Project Work Types:
- New artifacts: +5
- Repetitive activities: 0
- Quality problems: +5
- Obstacles: +2
- Calendar events: +1
SCORE: +13 – moderate to strong positive impact on IT project work!
Summary: much better than Scrum, but still with some weaknesses.
Kanban for IT Project Work
Kanban is different from most other approaches to agility in that it is a “continuous flow” method, rather than an iterative/incremental method. This distinction basically means that we move packages of work through a process based on capacity instead of based on a fixed cadence. Kanban asks that we visualize the current state of all work packages, limit the amount of work in progress at any stage in our delivery process, and use cadences only for iterative and incremental improvement of our process (not our work products).
Kanban is much gentler than Scrum or Extreme Programming in that it does not require leader-led reorganization of staff into cross-functional team units. Instead, we identify a service delivery value stream and leaders manage that stream as it currently operates.
New artifacts in Kanban are supported, and certainly welcome, but Kanban does not seem to acknowledge the problem of formal complexity (creativity, problem-solving, human dynamics) in the creation of new artifacts. There are good attempts to apply statistical methods to the management of new artifacts, but their fundamentally unknowable cost/end (undecidable problem) is not really effectively addressed.
Repetitive activities are handled extremely well in Kanban including different classes of service. Repetitive activities are handled well partly as a result of the history of Kanban as a signalling system in manufacturing environments.
Quality problems are handled similarly to new artifacts: supported, welcome, and even possibly addressed in the cadences of continuous improvement that Kanban supports. However, quality problems are another area where technical complexity makes proper analysis of these activities difficult.
Kanban relegates the handling of obstacles to the manager of service delivery. There is no explicit support for strong organizational change efforts. In fact, Kanban discourages “transformative” change which is sometimes required given the problem of Nash equilibriums.
Kanban works well with Calendar events by treating them as activities with a particular class of service required.
Kanban Support for IT Project Work Types:
- New artifacts: +3
- Repetitive activities: +5
- Quality problems: +3
- Obstacles: 0
- Calendar events: +5
SCORE: +16 – strong positive impact on IT project work!!
Summary: even better than XP, easier to adopt. (Actually, almost anything is easier to adopt than XP!!!)
OpenAgile for IT Project Work
OpenAgile is an obscure non-technology-oriented method based on the work I and a few others did about 10 years ago. The OpenAgile Primer is the current reference on the core of the OpenAgile framework. OpenAgile has been applied to general management, small business startups, sales management, mining project management, emergency services IT, and many other areas of work. I’m partial to it because I helped to create it!
OpenAgile emerged from consulting work I did at CapitalOne in 2004 and 2005 and work I did with my own business in 2006 and 2007. A great deal of the older articles on this blog are forerunners of OpenAgile as it was being developed. See, for example, Seven Core Practices of Agile Work.
The types of work listed above, are indeed the core types of work described in OpenAgile. As such, OpenAgile fully supports (nearly) all five types of activities found in IT projects. However, OpenAgile is not just a work delivery method. It is also a continuous improvement system (like Kanban and Scrum) and so it also assumes that a team or organization using OpenAgile must also support learning. This support for learning means that OpenAgile does not over-specify or give precise definitions on how to handle all five types of work. Thus, my scores below are not all +5’s…
OpenAgile Support for IT Project Work Types:
- New artifacts: +4
- Repetitive activities: +4
- Quality problems: +4
- Obstacles: +4
- Calendar events: +4
SCORE: +20 – very strong positive impact on IT project work!!!
Summary: OpenAgile is the best approach I know of for general IT project environments.
Regrettably, I wouldn’t always recommend OpenAgile – there are just too few people who really understand it or know how to help an organization adopt it effectively. If you are interested, I’d be happy to help, and we can certainly arrange private training and consulting, but mostly I would recommend Kanban to people interested in taking the next step in effectiveness in IT projects. Please check out or Kanban learning events and consider registering for one or asking for us to come to your organization to deliver training, coaching or consulting privately.
If you find this useful, please consider contributing with our
“Value for Value” model.